Tips in Extracting Popcorn Ceiling


Removing Popcorn Ceiling is a fascinating job. It not just involves extracting the old ceiling, but also includes rewiring your house so that a new ceiling can be set up. But before you proceed with the project, you should do the proper research about the whole procedure so that you know what to anticipate. And in case you are not familiar with the removal of the popcorn ceiling, here is a step by step Popcorn Ceiling Removal Austin guide that will help you.

When extracting popcorn ceiling, make certain that you use protective gloves and safety glasses, as they will protect you from any danger of injury when working. After picking the preferred extraction professional, visit his workplace and make certain that everything is ready for the project. In addition to the devices, you will require to rent or buy a saw, screwdriver, hammer and other tools. Also, bring any heavy items with you to make sure that they too are safe during the removal.

There are two common techniques of extracting popcorn ceilings. The first one is to use drywall glue or tape to slow to the ceiling. The advantage of this technique is that it needs little effort; nevertheless, the problem with it is that it might not completely extract the popcorn. Additionally, the drywall glue or tape is a bit messy, which may make the entire job difficult.

The second recommended method for removing popcorn ceiling is by using drilling machines or heavy duty top popcorn ceiling removal in 78746 area commercial trucks with cranes to extract them. In order to successfully extract it, make certain that you remove all the light fixtures and other heavy components present on the ceiling. In addition, remove all the tiles and light fixtures present in Popcorn Ceiling Removal Austin - the space. Extract any type of decorations to make it easier to access the screws or the jambs that can be removed.

Scrapers are utilized for smoothing out the texture or finish on the walls and ceiling. It is best to utilize an old tooth brush or cotton buds as it allows scraping without harming your floorings or furniture. Bear in mind that if there is any texture on the wall, make sure to smooth it out utilizing scraper. Nevertheless, if you are preparing to scrape without damaging your surface areas, you can use the exact same item for the function. Merely wet the things, spread it on the wall and permit it to sink into the wall or flooring.

Utilize the fiber brush and scrape along the surface of the product. Make certain you wear safety gloves when utilizing the asbestos scraper to prevent getting exposed to the substance. If the substance is exposed, it may cause some health issue like shortness of breath, coughing, swelling of the lung tissue and other related health problems. When you have actually scraped enough, you must now have the ability to see the popcorn. Now that the popcorn is removed, you can proceed to the painting task.

Prior to applying the paint, you need to take off all decors on the ceilings. It is better to extract them prior to applying the paint because you will not have to sand them later on. The next action is to use a thin coat of paint on the ceiling using the supplied brush. This will cover the popcorn texture left on the ceilings.

For the 3rd and last step, put the textured ceiling panels on top of the old one and let it dry for a few hours. You can then go back to the lights and change the lighting fixtures. Prior to installing the lights on the ceilings, make certain that the panels are set up appropriately so that there is a brand-new layer of texture used which the new layer matches the texture of the ceiling perfectly.

Learn More:

Popcorn Ceiling Removal Austin

2882 Barton Skyway #239 A

Austin, TX 78746